Shenzhen Tronsyn Telecom Trading Firm
Main products:Intercom,Phone Handset,Smart Phone
Products
Contact Us
  • Contact Person : Ms. Ma Sophie
  • Company Name : Shenzhen Tronsyn Telecom Trading Firm
  • Tel : 86-755-89442569
  • Fax : 86-755-89442569
  • Address : Guangdong,Shenzhen,No.1053, Yuanwang Digital Mall, Huaqiang bei Road, Futian District, Shenzhen, China
  • Country/Region : China
  • Zip : 518000

MEANWELL LED Driver 25W 15V single output constant voltage with PFC 1~10V PWM dimming /LPF-25D-15 /LPF-25D-15 UL/CB/CE

MEANWELL LED Driver 25W 15V single output constant voltage with PFC 1~10V PWM dimming /LPF-25D-15 /LPF-25D-15 UL/CB/CE
Product Detailed
1.Built-in active PFC function 2.Cooling by free air convection 3.Fully isolated plastic case 4.Class power unit, no FG

 MEANWELL LED Driver 25W 15V single output constant voltage with PFC 1~10V PWM dimming /LPF-25D-15 /LPF-25D-15 UL/CB/CE

Features :

Universal AC input / Full range (up to 305VAC)

Protections: Short circuit / Overload / Over voltage / Over temperature

Built-in active PFC function

Cooling by free air convection

Fully isolated plastic case

Fully encapsulated with IP67 level (Note.6)

Class power unit, no FG

Class 2 power unit

Built-in 3 in 1 dimming function (1~10Vdc or PWM signal or resistance)

Suitable for LED lighting and moving sign applications

Compliance to worldwide safety regulations for lighting

Suitable for dry / damp / wet locations

3 years warranty

MODELLPF-25D-15
OUTPUTDC VOLTAGE15V
CONSTANT CURRENT REGION Note.47.5 ~ 15V
RATED CURRENT1.67A
RATED POWER25.05W
RIPPLE & NOISE (max.) Note.2150mVp-p
VOLTAGE TOLERANCE Note.3±4.0%
LINE REGULATION±0.5%
LOAD REGULATION±1.5%
SETUP, RISE TIME Note.71500ms, 80ms / 115VAC at full load 1500ms, 80ms / 230VAC
HOLD UP TIME (Typ.)16ms at full load 230VAC /115VAC
INPUTVOLTAGE RANGE Note.590 ~ 305VAC 127 ~ 431VDC
FREQUENCY RANGE47 ~ 63Hz
POWER FACTOR (Typ.)PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
EFFICIENCY (Typ.)84%
AC CURRENT0.4A / 115VAC 0.2A / 230VAC
INRUSH CURRENT (Typ.)COLD START 50A/230VAC
LEAKAGE CURRENT<0.75mA / 240VAC
PROTECTIONOVER CURRENT Note.495 ~ 108%
Protection type : Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUITHiccup mode, recovers automatically after fault condition is removed.
OVER VOLTAGE17.5 ~ 21V
Protection type : Shut down and latch off o/p voltage, re-power on to recover
OVER TEMPERATURE95J Ó 5J( TSW1) Detect on U2
Protection type : Shut down o/p voltage, recover automatically after temperature goes down
ENVIRONMENTWORKING TEMP.-40 ~ +70 °C(Refer to "Derating Curve")
WORKING HUMIDITY20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY-40 ~ +80°C , 10 ~ 95% RH
TEMP. COEFFICIENT±0.03%/°C (0 ~ 50°C )
VIBRATION10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMCSAFETY STANDARDS Note.6UL8750, CSA C22.2 No. 250.0-08 (except for 48V, 54V),EN61347-1, EN61347-2-13 independent, IP67 approved ; Design refer to UL60950-1, TUV EN60950-1
WITHSTAND VOLTAGEI/P-O/P:3.75KVAC
ISOLATION RESISTANCEI/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH
EMC EMISSIONCompliance to EN55015; EN61000-3-2 Class C ( 50% load) ; EN61000-3-3
EMC IMMUNITYCompliance to EN61000-4-2,3,4,5,6,8,11; EN61547,light industry level(surge 2KV), criteria A
OTHERSMTBF418.5Khrs min. MIL-HDBK-217F (25 °C)
DIMENSION148*40*32mm (L*W*H)
PACKING0.36Kg; 40pcs/ 15.4Kg/1.02CUFT
NOTE

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. Constant current operation region is within 50% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design.

5. Derating may be needed under low input voltages. Please check the static characteristics for more details.

6. Suitable for indoor use or outdoor use without direct sunlight explosure. Please avoid immerse in the water over 30 minutes.

7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.

8. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 9. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers

 

 

MEANWELL LED Driver 25W 15V single output constant voltage with PFC 1~10V PWM dimming /LPF-25D-15 /LPF-25D-15 UL/CB/CE



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.